Haier HPRB07XC7 User Manual - Page 8

English Operation Control Panel Mode Light Power Control The power control turns the unit on and off. When you press power control, the unit begins to operate. Its operation mode is auto and fan speed is auto. Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning Light will shine and the unit will not operate until the unit has been drained. Operating mode indicator Indicator color of operating mode and LED : When cooling mode is selected, the indicator light will be blue. When dehumidify mode is selected, indicator light will be yellow. When fan mode is selected, indicator light will be green. When auto mode is selected, indicator light will be based on the operating mode. Temp. and Time Setting Indicator • During operation, the unit displays "present room temperature." • When setting temperature, the unit will display set temperature. • When setting the time it displays "set time" and indicator flashes. • 5 seconds after "set temperature" and "set time", it goes back to "present room temperature". • Temperature display ranges from 64˚F to 89˚F. • When environmental temperature is higher than the temperature display range, the display shows "HI". • W hen environmental temperature is lower than the temperature display range, the display shows "LO". • When the unit stops operating, indicator light goes off. After switching the air conditioner off, you must wait 3 minutes before switching it back on again. 7