Haier HPRB07XC7 User Manual - Page 9
Remote Control
View all Haier HPRB07XC7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operation Remote Control English • Auto Mode Turn on the unit and choose "Auto" mode. The unit will switch its mode and fan speed automatically based on the environment temperature. Fan Speed Control The Fan Speed Control has 4 settings: Auto, High, Medium and Low. Power Control The power control turns the unit on and off. Mode Control The Mode Control has 4 settings: • Cool • Dehumidify • Fan • Auto The settings are adjusted by Mode Control button. • Cooling Mode During the cooling mode the air is cooled and hot air is exhausted to the outside air through the air exhaust hose. Adjust fan speed and temperature to suit your desired comfort level. Note: The air exchange hoses must vent outside the room when using Cool Mode. • Dehumidify Mode Air is dehumidified as it passes through air conditioner, without being in full cooling mode. If room temperature is greater than 77˚F, fan speed can be adjusted; otherwise fan speed is fixed to "low." Note: The warm air exchange hose must vent inside the room when using Dehumidify Mode, not outside as it does when cooling. If the unit is vented outside when using Dehumify Mode some cooling will occur. Temp Set Controls Press "Up" or "Down" to set temperature. The setting range is from 64˚ to 89˚F. Note: When using Auto, Dehumidify or Fan Mode, temperature setting button is invalid. Fahrenheit / Celsius Selector Press the ˚C / ˚F switch button, to switch between ˚F and ˚C. Note: Initial setting is ˚F. Timer Setting Control • When you use the timer setting button while the unit is operating, you can preset a time for the unit to turn off. • When you use the timer setting button while the unit is on standby, you can present a time for the unit to turn on. • If you press the "ON/OFF" button, the preset timer function will be cancelled. • Timer setting range is 1~24 hours. Timer Cancel Control • You can cancel the timer setting at any time by pressing the "Cancel" button. • Fan Mode Air is circulating throughout the room with no cooling. Note: Unit does not need to be vented in Fan Mode. 8