Haier HPU-16CB03 User Manual - Page 16

Operation Manual Timer on-off function SWING TEMP Remote controller operation TIMER ON-OFF (1) After unit start, select your desired operation mode. Operation mode will be displayed on LCD. (2) TIMER mode selection Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: Remote controller ON AM 12:00 TIMER ON OFF PM 12:00 TIMER OFF ON OFF AM 12:00 PM 12:00 TIMER ON-OFF BLANK Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF will flash. (3) Timer setting for TIMER ON Press HOUR button. Every time the button is pressed, time increases 10 min. If button is kept pressed, time will change quickly. Every time the button is pressed, time decreases 10 min. If button is kept pressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours. AM refers to morning and PM to afternoon. (4) Time confirming for TIMER ON After time setting, press TIMER button to confirm," ON " stops blinking, while " OFF " starts blinking. Time displayed: Unit starts or stops at x hour x min (5) Time setting for TIMER OFF Follow the same procedure in "Time setting for TIMER ON". (6) Time confirming for TIMER OFF After time setting, press SET button to confirm, " OFF " stops flashing. Time displayed: Unit stops at x hour x min TEMP ON HEALTH OFF FAN 1 MODE SLEEP SWING CLOCK SET 3 TIMER 6 245 RESET LIGHT LOCK To cancel TIMER mode Just press TIMER button several times until TIMER mode disappears. According to the Time setting sequence of TIMER ON or TIMER OFF,either ON-OFF or OFF-ON can be achieved. 14