Haier HPU-42H03 User Manual - Page 10

Operation Dry Manual Operation TIMER CLOCK TIME TIME SET SLEEP : AM LOW 32 SET TEMP C TEMP MODE TEMP ON OFF SWING FANSPEED 51 4 Remote-control unit AUTO AM TEMP ON 3 SWING OFF FAN4 15 MODE SLEEP 2 CLOCK SET TIMER LOCK RESET 1 Press ON/OFF button Unit starts running. The previous status appears on the display (except. TIMER, SLEEP and SWING mode) 2 Press MODE button. For each press, operation mode changes as follows: Manual AUTO COOL DRY FAN HEAT Remote controller AUTO COOL DRY HEAT FAN Select Drying operation shows" " Dry operation starts 3 Select temp. button Press TEMP button Every time the button is pressed, temp. setting increases 1 C Every time the button is pressed, temp. setting decreases 1 C If the button is kept pressed, setting will increase or decrease quickly. 4 Press FAN button. For each press, fan speed changes as follows: Manual LOW MID HIGH A U T O LOW LOW MID LOW MID HIGH Remote controller AUTO AUTO LOW MID HIGH Unit runs at the speed displayed on LCD. In DRY mode, when room temp.becomes 2 C higher than temp. setting,unit will run intermittently at LOW speed regardless of FAN setting. 5 Press ON/OFF button Unit stops running, and when entering this mode for the next COOL operation starts when room temp. is higher than temp. setting. Ultra-low air flow Temp.setting+2 C Temp.setting time, it will show the previous setting On reaching 2 C higher than temp. setting,unit will run in mild DRY mode. 8