Haier HWM100-000 User Manual - Page 10

1Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put the drain hose up to suitable position. Pay attention to followings before washing the laundries Note: "H" is the height of the hanged drain hose. Confirm if there has special requirement for the laundries. The quantity of the laundries shall not exceed the rated value. The big laundries like jeans shall be put in loosely. Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim and ornaments Empty pockets and turn them inside out. Turn down cuffs, brush away lint and dirt. Tie strings and sashes so they will not tangle. Mend tears, loose herms, and seams. Treat spots and stains. Stained or wet garments should be washed promptly for best results. Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint givers(towels, chenille) from lint takers(corduroy, synthetics, permanent press). When possible, turn lint givers inside out. Separate dark colors from light colors, colorfast items from non-colorfast items. Sort by fabric and construction(sturdy cottons, knits, delicate items).