Haier HWM100-000 User Manual - Page 13

5 Select water level LOAD SIZE MEDIUM LARGE RESET SMALL LOAD SIZE KNOB Three water levels available according to the laundries quantity: Large; Medium; Small. Page 8 After the water inlet as per the preset water level, in case additional water quantity is required, please first set the button to the "RESET", and perform automatic water inlet. When it reaches the suitable water level, you can turn it to the preset water level. After the water inlet under set water level, if higher water level is needed, please first turn the knob to " Reset ", then turn back to needed water level. The washing machine will fill water to the new water level automaticly. 6 Set of temperature of wash and rinse water According to the different washing laundries,5 kinds of different wash/rinse temperature may be selected. Note: For the marked temperature, the upper is wash temperature, and the lower is rinse temperature. TEMPERATURE WASH RINSE WARM COOL COOL COOL WARM WARM HOT COOL HOT WARM 7 Cycle program select First push on the cycle selection button. Rotate this button in clock wise direction. You may select the following cycles singly: REGULAR cycle, DELICATES cycle, HAND WASHABLE and PERM PRESS cycle. The wash time may be set for each cycle according to the requirements. After finishing the selection of cycle, pull out the button and the washing machine may begin to work. If want to stop the washing machine at any time, push in the cycle control button. If restart the washing machine, close the cover first, then pull out the cycle control button. PERM PRESS Spin OFFSoak REGULAR Note: There is pause step in each washing cycle, this is normal in operation of washing machine. In the operation of washing machine, sounds appeared in P may be heard, and most of these sounds are normal. Rinse Light 6 Regular 9 OFF Heavy 15 Regular 6 Rinse Spin Spin PULL TO START Rinse PULL TO STOP Regular 6 OFF OFF Regular 6 Light 3 Rinse Spin HAND WASHABLE DELICATES