Haier HWM100-000 User Manual - Page 6
Installation and adjustment
View all Haier HWM100-000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Adjust the installation position The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to confirm if it is horizontal. Adjust the adjustable foot: 1.To twist the adjustable foot, please first lift up the side of the foot slightly, and twist the foot. 2.Fasten the nut after adjustment. Adjustable foot High Low Install the drain hose Outer drain hose First install the drain hose hook on the parts of component outer drain hose component. Put the drain hose clamp on the outer drain hose, insert the outer drain hose into the joint for it, and then clutch tightly with drain hose clamp. Drain hose hook Drain hose clamp Usage of the drain hose Hang the outer drain hose on the proper place before washing( do not use it toppled down on the ground). Attend that the outlet of drain hose shall be higher than the water level in washtub to avoid siphon phenomenon. Drain hose joint