Haier HWM33-200 User Manual - Page 5
Install the lint filter
View all Haier HWM33-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety precautions Before using Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly. Install the lint filter Insert the bottom of the lint filter ( marked with down side ) into the filter frame, then push the upper part of the filter in ( marked with up side ).(See to Figure) Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with one screw by a cross screwdriver, then lift the machine up gently. See to the figure: Adjust the installation position The largest allowable slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Adjust the adjustable leg: 1.To twist the adjustable leg, please first lift up the leg side slightly, loosen the adjustable nut, and then twist the leg. 2.After adjustment, fasten the nut. Loosen High Adjustable nut Fasten Adjustable leg Low 3