Haier HWM50-0566 User Manual - Page 7

b Steps of using the operation buttons and description of the steps Start Pause Soak 7 Sterilize Soak Wash Rinse Spin 20 Thrice 15 Twice Once Wash Rinse Sterilize 3 Spin Reserve Lock 6 42L 45L 36L 39L 29L 32L 22L 26L 14L 18L Wleavteelr carpeting Standard Fibre Save Wool Superfast TUB CLEAN Program TUB CLEAN Power 5 4 2 Power 1.Push "power" button to switch on the power 2.Push "program" button to select suitable Program full-auto program After the power is switched on, "standard" is automatically set. To select other full-auto program, please push the "program" button till the corresponding indicator is on. Refer to the "Program button" on Page 11. E.g. Set to "Superfast" program for small quantity of laundries with light soil. In selecting the standard program, the machine will execute fuzzy program to select water and wash time according to the cloth and weight of the laundries. The full procedure is controlled automatically. 3 Push "soak", "wash", "rinse/sterilize", "spin" button to select suitable procedure program Soak Wash Rinse Spin Sterilize Attention Even there's no water in the tub, a certain period is required before spin starting. Separate the laundries that are not colorfast from other laundries in washing. The pulsator will not rotate unless the water is filled to selected water level. 12 How to change the direction of the drain hose 1.Dismantle the back cover. 3.Protrude the drain hose from the hole on the right side of the bottom,and fasten it onto the bottom with rack and screw. 2.Put down the drain hose.Take off the drain hose rack.Pull the drain hose into the cabinet from the left side of the bottom. 4.Install the back cover. Using the drain hose The drainage shall be smooth with the drain hose. 1.put the drain hose up to suitable position (Do not 2.Do not step on or press the drain hose. put it on ground.) Notes: The highest point of drain pipe shuold be higher than the water level of washing tub for avoiding to siphon phenomenon during drain. 0.8m