Haier HWM50-0566 User Manual - Page 8
Install the water inlet hose
View all Haier HWM50-0566 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Install the water inlet hose 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE: Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve . ( As figure 2) Figure 1 Jointer of the water inlet hose Jointer of the water inlet valve Water absorption cushion Figure 2 Reserve, remain time digitron It displays "--" during detecting. It displays remained reserve time (hour). It displays total remained time (min). It displays abnormal symbol in abnormal situation. (See to Page15) "Power" button Push the "power" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "power" button to switch on the power. If the "start/pause" button is not pushed, the machine will switch off the power automatically after 5 minutes. Reserve Lock 42L 45L 36L 39L 29L 32L 22L 26L 14L 18L Water level carpeting Standard Fibre Save Wool Superfast TUB CLEAN Programe TUB CLEAN Power "TUB CLEAN"button Push the "TUB CLEAN" button ,then the "TUB CLEAN"indicator light is on, that means the "TUB CLEAN"programis chosen. The purpose is dry the outer tuband the inner tub, which can avoid growingmildew on the outer tuband the inner tub. "Water level" button "Reserve" button The digitron displays remain time before washing is finished (in minutes) Push "reserve" button, the digitron displays the reserve time of washing (in hours). The indicator flashes to indicate that the reserve function is operating. Push "reserve" button to display the reserve mode. The washing machine can detect the laundries automatically in standard program. After detection,it will set the water level to suitable value among 4, 6, 8,and 10 automatically. You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting. If there's water inside the tub, the machine cannot detect the laundries and will display water level 32L . If wet laundries are put in, it may display water level 45L . You must set suitable water level by yourself. If superfast program is selected, it will display water level 22L . When water level 18L is reached in water filling, it will perform washing while filling water.When water level 22L is reached, it will change to normal washing. During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries. "Program" button Following full-auto program is available Program Application Standard Common washing Save washing for light-soil saving laundriesl Superfast Washing for light-soil a few laundries Carpeting washing for carpet or heavy thickness and damnify large laundries--usually under 3kg Fibre washing for fibre laundries For silk textiles slap-up laundries Wool usually under 2.5kg Remark: If you want towash wool silk or other topgrade laundries ,please select woolprogram