Haier HWM50-0566 User Manual - Page 9

5 Push operation button a Description of operation button Indicator mode and meaning Off Flashing, indicating the running program On, indicating the program about to run or the selection mode Start/paush button After the power is switchedon,press it to start the machine During working,push it to pause. During pause,push this button torestart and go on working Child lock function Push and hold thereserve button and spinbutton, then push downthe power on/off button .Thedigitron displays C L .You cancontinue setting desired washing procedures.After setting ,push downthe start/pause button. The child lockfunction is activated. allof the buttons arelocked and cannot make selection. Release the child lockfunction :push down reserve button and spin button at the sametime for more 2seconds .After a beepsound ,the child lock function is released. Sterilize Soak Start Pause Soak Wash 20 15 Wash Rinse Thrice Twice Once Rinse Spin Spin Sterilize Lock Check the connection between the water inlet hose and the water tap 1.Swaying the hose gently to confirm if it is fastened stable. 2.After installation, open the tap to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the water inlet hose and the water tap is firm, so as to prevent dropping from improve Installation position. Take down the water inlet hose 1.After using,Close the water tap. 2. Pull off the water inlet hose from the water tap and washer "Soak" button Push "soak" button to set soak procedure. In standard, carpeting programs, push "soak" button to set different soak time (10, 20, 30 minutes) In fibre programs, push "soak" button to set soak procedure, but soaktime can not be changed. In saving and superfast wool programs, pushing "soak" button has no effect. "Wash" button "Rinse/Sterilize" button Push "wash" button to set wash procedure. In standard,carpeting programs, push "wash" button to set different wash time (0 6 9 15 20 minutes) In fibre programs, push "wash" button to set wash procedure, but washtime can not be changed. In saving and superfast wool programs, pushing "wash" button has no effect. Push this button for 2 seconds or longer, the sign of "sterilizate "will be lightened. That mean that function is chosen. Push "rinse/sterilize"button to set rinse procedure. In standard,carpetingprograms, push "rinse" button toset different rinse times (0, 1, 2, 3 ) In fibre programs,push the "rinse/sterilize"button to set rinseprocedure, but rinse times can not be changed. In saving and superfast wool programs, pushing "rinse" buttonhas no effect. Push this botton for 2 seconds or longer the sign of Sterilize will be lightened,that mean the function is chosen Push this botton for 2 seconds again will clear this function ,the sign will be turued off "Spin" button Push "spin" button to set spin procedure. In standard, carpeting programs, push the "spin" buttonto set different spin time (0 1 3 5 7 minutes). In fibre programs, push the "spin" buttonto set spin procedure. In saving and superfast wool programs,pushing "spin" button has no effect.