Haier HWM60-20B User Manual - Page 12

Use the operation buttons Description of the function of the buttons Mode and meaning of the indicator Flash : indicating the running mode On: indicating the mode about to run "POWER ON/OFF"button Push the POWER ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. Push the POWER ON/OFF button to switch on the power. If the start/pause button is not pushed, the washing machine will automatically switch off the power after 5 minutes. Program button The following five programs are available for your option P Standard Common washing R O Heavy Washing the heavy clothes G Gentle Washing the woolen textiles or underwear R A Fast 10-minute quick washing of laundries with light soil M Jeans Washing the relatively big and thick laundries RESERVE remain time indicator digitron During sensing, it displays During reserve procedure, it displays the remained reserve time (in hours) During operation of programs, it displays the remained time (minutes). In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 15) Page15 STANDARD HEAVY GENTLE PROGRAM FAST JEANS RESERVE(HOURS LATER) SURPLUS SOAK (MIN) WASH RINSE SPIN PROCEDURE RESERVE WATER LEVEL START PAUSE POWER ON/OFF Procedure button Push it to select one or more programs from SOAK WASH RINSE and SPIN Reserve button Push the button to select washing finishing time between 2-24 hours. When the RESERVE function is activated, the digitron of TIME REMAIN is flash. The other indicators are off. Push the RESERVE button to display the reserve mode. Water level button The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value among 4, 6, 8,and 10 automatically. You can also set water level by self. After the machine is started, it will not set water level automatically. You shall push the START/PAUSE button to make new setting. If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 . If wet laundries are put in, it may display water level 10 . You must set suitable water level by yourself. If quick program is selected, the water level will be set to 2 automatically . And you cannot change the water level by yourself.. During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries. Start/Pause button After the power is switched on, push it to Start the machine During working, push it to pause working. During pause, push it to resume working. 10