Haier HWM60-20B User Manual - Page 14

Attention Even there's no water in the tub, a certain period is required before spin starting. Do not use the soak program for the woolen textiles. Separate the laundries that are not colorfast from other laundries in washing. The pulsator will not rotate unless the water is filled to selected water level. Procedure selection method Times of pushing the PROCEDURE button Selected procedure Applicable circumstance Contents (the lighted indicators indicate the programs about to run) WASH - RINSE-SPIN When the common laundriesneed SOAK WASH RINSE SPIN (STANDARD procedure) washing, rinsing and spinning. WASH (the washing liquid remains in the tub) WASH - RINSE (the rinsing liquid remains in the tub) RINSE - SPIN SPIN (spin after drain) SOAK - WASHRINSE-SPIN Repeat using the washing liquid SOAK WASH RINSE SPIN When prevent the laundries from SOAK corrugating, and the laundries do not need spinning When the laundries need only rinsing, spinning after manual washing SOAK When the laundries need only spinning after manual washing SOAK (first drain then spin) The laundries are very dirty, or the sleeves and collars of the shirt are SOAK very dirty. First soak then wash. WASH WASH WASH WASH RINSE RINSE RINSE RINSE SPIN SPIN SPIN SPIN Push the PROCEDURE button for 6 times, and it will resume the initial mode. It will circulate in that sequence. The SOAK procedure can work in cooperation with automatic programs like standard ,jeans and heavy. There is intermittent pulsator stirring during soak. Press " WATER LEVEL "button, select suitable water level WATER LEVEL After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically. To select other water level, first push the "start/pause" button, then push the "water level" button to set the water level, to select a suitable water level depending on the load. Refer to the "water level button" on Page 10 for the selection. 12