Haier HWM65-828 User Manual - Page 8

How to change the direction of the drain hose 1.Dismantle the rear cover of the washing machine. 2.Put down the drain hose .Take off the drain hose frame as indicated in Figure 1.Take the drain hose into the cabinet ,then nip the drain fixing clamp to make it deviated from the clip,the other hand is used to put down the drain bushing,as indicated in Figure 2,3. Drain hose 3.Dismantle the drain outlet protecting cover at the other side, (the way is the same as the drain bushing),then install the drain bushing, as indicated in Figure 4. 4.Extend the drain hose from the other side. Fix the drain hose with drain hose frame onto the cabinet, as indicated in Figure 5. Drain outlet protecting cover Figure 1 Drain hose support Cabinet Inner Outer Push Drain bushing Figure 2 Drain bushing Drain bushing Figure 4 Figure 5 5.Install the drain outlet protecting cover to the other side, as indicated in Figure 6 Drain hose fixing clamp Push Take down Figure 3 Figure 6 Remarks: In order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman . 6 Use the operation buttons Description of operation button DELAY K SET FIRST RINSE SECOND RINSE THIRD RINSE RESERVE WATER AIR DRY SOAK WASH RINSE SPIN WATER LEVEL STANDARD HEAVY CHILD SPEEDY MEMORY °GENTLE WOOL TUB DRY START PAUSE PROGRAM POWER ON/OFF Indicator mode and meaning Off Flashing, indicating the running program On, indicating the program about to run or the selection mode Child lock function The function is intended for children safety and preventing the washing program from accidental changes by children. Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/ OFF button .The digitron displays " " . You can continue setting desired washing procedures. After setting ,push down the START/PAUSE button. The child lock function is activated, all of the buttons are locked and cannot make selection . Release the child lock function :push down WATER button and SPIN button at the same time for more 2 seconds . After a beep sound ,the child lock function is released. POWER ON/OFF A "POWER" button Push the "POWER" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will switch off the power automatically after 5 minutes. START PAUSE B "START/PAUSE" button After the power is switched on, press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working. PROGRAM C "PROGRAM" button Program Application STANDARD Standard saving washing for normal laundries HEAVY CHILD Washing the relatively big and thick laundries Washing the children clothes ,the default program contains soak function Quick washing for normal laundries, SPEEDY under 1.5kg Program MEMORY GENTLE Application The commom wash ,the washing machine will set to MEMORY program including "wash ,rinse ,spin , water level "automatically last time Washing the cotton textiles WOOL Washing for the woollen laundries, under 2.5kg ° TUB DRY ° Avoid growing mildew on the outer tub and the inner tub 11