Haier HWM70-918NZP User Manual - Page 8
How to change the direction of the drain hose
View all Haier HWM70-918NZP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How to change the direction of the drain hose 1. Dismount the back cover of the 3. Extend the drain hose from the other washing machine. side, then fix the screw of the drain hose 2. Put down the drain hose. Take off rack, fix the drain hose hook and hang the drain hose hook. Then take off the the drain hose on the cabinet. screws of the drain hose rack. (As indicatedin Figure 3). Put the drain hose into the cabinet. 4. Install the back cover, first put the (As indicated in Figure 2). down claws on the cabinet, and then put the claws(marked with )into the cabinet from down to up, and fix the Back cover screws. (As indicated in Figure 4) Figure 1 Drain hose rack Screws Figure 2 Figure 3 Up claws Screws Two sides claws Down claws Figure 4 The drain hose shall drain smoothly. 1 The height of the drain hose shall be less than 10cm , or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2 Do not trample or press the drain hose. 3 If the drain hose is too long, cut it at mid point. To make smooth drainage,cut the front end of the hose slantingly. 4 If extra drain hose is needed,please make separate purchase.The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. 5 If the extra hose is too long,cut it either at A or at B point. 8