Haier HWM80-0566 User Manual - Page 9
Use the operation buttons
View all Haier HWM80-0566 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5 Use the operation buttons a Description of operation button Indicator mode and meaning Flashing, indicating the running program On, indicating the program about to run or the selection mode 4 3 2 1 LWEAVTEELR SOAK WASH RINSE SPIN TIME REMAINED(MINUTES) RESERVE(HOURS LATER) PROCESS RESERVE "Process"button With it you can select one or several processes of soak, wash, rinse and spin. "Water level" button During the standard program,the washing machine can detect the laundries automatically. After detection,it will set the water level to suitable value among 1, 2,3,and 4 automatically. You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting. If save program is selected, it will display water level 2 . When water level 2 is reached in water filling, it will perform washing while filling water. When water level 3 is reached, it will change to normal washing. "Reserve" button The digitron displays remain time before washing is finished (in minutes) Push "reserve" button, the digitron displays the reserve time of washing (in hours). The indicator flashes to indicate that the reserve function is operating. Push "reserve" button to display the reserve mode. Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. jointer of the water inlet valve nut of the water inlet hose water absorption cushion. Connection between the jointer of the water inlet hose and the water inlet hose 1.Push down the slider. Insert the water inlet hose into the jointer. Locking level 2 Hang the lock lever to the jointer. Release the slider till a click sound is heard. the jointer of the water inlet hose Slider Check the connection between the jointer of the water inlet hose and the water faucet 1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position. Dismantle the water inlet hose 1. Close the water faucet. 2. Press the locking lever. Push down the slider. Then pull of the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw. Locking level Slider