Haier HWM80-0626SH User Manual - Page 10

Washing sequence Wash timer (To set to below 2 minutes, first set to 6 minutes then turn it back.). Function selector (Soft current, Standard current) Drain switch Not set the switch to DRAIN during washing STANDARD SOFT STANDARD SOFT CALEFACTION OFF DRAIN WASH TIMER (HWM80-0626S) (HWM80-0626SH) FUNCTION SELECTOR DRAIN SWITCH Spin timer (To set to below 1 minute, first set to 2 minutes then turn it back. it can increase the service life of the timer). OFF 5 1 4 2 3 SPIN TIMER Wash 1.Water-filling selector 1 Set the water inlet selector at the "WASH" side. WASH SPIN WATER INLET SELECTOR (Figure 1) Figure 1 2 Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Figure 2 Run washing program for some time to stir and dissolve the powder completely. STANDARD STANDARD Page7 SOFT SOFT 3.Put in the laundries. If the water quantity is insufficient, please add water. CALEFACTION Figure 3 4.Select the current. (HWM80-0626S) (HWM80-0626SH) Select the strength of the current according to FUNCTION SELECTOR the laundries. (Figure 3) 5.Select the washing time Select the washing time according to the laundries. (Figure 4) OFF 6.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 5). Figure 4 WASH TIMER DRAIN Figure 5 DRAIN SWITCH 8