Haier HWM80-0626SH User Manual - Page 7

How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Back Extend the drain hose from the side of spin tub Front Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Dismantle the drain hose fixing clamp and take the hose out of the fixing groove. (See to Figure 2). Soft item Embed the drain hose into the groove along the side of the spin tub in the order of 1 ~ 3 , heading for the side of the spin tub. (See to Figure 3). Figure 1 Figure 2 Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. Extend to the spin tub side Fig ure 3 Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control panel To dismantle the water inlet pipe, just push the control handle as indicated in the figure and pull it out Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Water inlet hose Water-filling entrance Water level indicator Maximum Max Medium Med Minimum Min 5