Haier HWM80-0626SH User Manual - Page 17

Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, Please take it out quickly. 1.Dismantle First take two plugs out, then dismantle the two screws which fixed the Spin tub frame. As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle it. Spin tub frame Figure 1 Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub ( Figure 2). If the laundries fall to the outer side of the spin tub, during spinning the draining will get blocked and the rotation speed of the spin tub is reduced. Spin tub Laundries Figure 2 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it, fix it with screws, then fixed the two plugs at the position. Figure 3 When the remained water is frozen Prevent the freezing Drain completely after using. When the water is frozen Pour hot water below 50 into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drainage can work normally before next using. Below 50 15