Haier HWM80-187S User Manual - Page 14
Cleaning the overflow filter, Clean the safeguard cover
View all Haier HWM80-187S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at the bottom of the filter into the valve cover. (3).Hang up the hook at the left upper side. (4).Push the upper part in as indicated in Figure 2. Water level adjusting lever Corrugation Pipe Figure 1 Hook Figure 2 Clean the safeguard cover The safeguard cover must be used during washing. The surface must be cleaned every time after washing. The underside of the cover must be cleaned every period of time. 1. Take off the safeguard cover Use the thumb to fasten the indicated groove£¬then take it out as the direction of the figure. Groove 13