Haier HWM80-187S User Manual - Page 6
Install the water inlet hose; Select the water level
View all Haier HWM80-187S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Soft item Extend the drain hose from the side of spin tub Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). Back Front Figure 1 Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading Soft item for the side of the spin tub. (See to Figure 3). Figure 2 Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. Extend to the spin tub side Embed into the groove in turn Figure 3 Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Water inlet hose Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Water inlet Water level indicator Max Maximum Med Medium Minimum Min 5