Haier HWM80-187S User Manual - Page 15

Clean the safeguard cover 2. Clean the underside of the cover Use the nipper or other spindly clamps to take out the lint , sundries etc. 3. Install the safeguard cover After finish cleaning , fasten the safeguard cover to the tub bottom, infirm the claw install correctly and hard to fall off. Disposal of the complete unit Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty. Do not wash it directly by water. Petrol Thinner Alcohol After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after each using. Pull off the power plug and hang up the power cord. Hang up the drain hose. Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them. 14