Haier HWS60-50 User Manual - Page 4

Safety precautions Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle. Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sale service department for the sake of avoiding any risk. In case the spin dryer is installed on ground with carpet , do not block the ventilation hole with carpet. Ventilation hole at the bottom of the spin dryer Do not share one receptacle with other electric appliances. Do not use it in case that the power plug is damaged or the inserting into the receptacle is loose. Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel. Do not wash water-proof laundries such as the raincoat, bicycle shelter etc. To avoid abnormal vibration during spinning.