Haier HWS60-50 User Manual - Page 8

Disposal after spinning 1 Hang up the drain hose. 2 Pull off the power plug and hang up the power cord. 3 Wipe the complete unit with soft cloth twisted dry. 4 Open the inner/outer cover of the spin tub for some time (about one hour), then close them. Maintenance 1 Wipe off the water drops on the surface and inside the tub with clean soft cloth. 2 Be sure to pull off the power plug before maintenance. If the cabinet is dirty, wipe it with wet soft cloth Do not wash it directly by water. Wipe with neutral detergent if too dirty Do not wipe with thinner, petrol, alcohol, etc. Petrol Thinner Alcohol Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason-How to solve The machine does not act. Is there power failure--Please use it when there's power supply. Is the power plug loose--Insert the power plug tightly. There's abnormal sound and violent vibration during spinning Is the machine slanting--Adjust the machine to be even Is the gland pressed evenly-- Put the gland in properly Check if the laundry is inclined to one side--Take it out and replace it evenly. Check if there are any metal articles in the laundry. -- take them out. Check if it is too full with the laundry-- load the laundry only in the right amount. Check if there are any articles out of the spinning drum -- put them into the drum.