Haier JW-Z20A User Manual - Page 14

Disposal after washing Using process Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) 2. Clean the lint Put it in water and clean while it is still wet.(See to Figure 2) 3. Install the lint filter After cleaning, insert the bottom of the lint filter ( marked with "down side") into the filter frame, then push the upper part of the filter in ( marked with " up side "). (See to Figure 3) Figure 2 Figure 1 Figure 3 The filter screen is likely to be blocked by foreign materials and influences water inlet. Please clean it with brush every two months. If the cabinet is dirty, wipe it with wet soft cloth * Do not wash with water directly. * Wipe with neutral detergent. * Do not wipe with thinner, petrol, alcohol etc. Petrol Thinner Alcohol 1. After washing, close the water tap (you can remove the water inlet hose if needed). 2. Do not store water inside the machine for a long period. Please drain the water thoroughly after each use. 3. Pull off the power plug before maintenance. 4. Hang up the power cord and drain hose. 5. Wipe off the water drops on the surface of the machine with clean soft cloth. Open the top lid for a period (about 1 hour), then close it. 3