Haier JW-Z20A User Manual - Page 7

Install the water inlet hose Before Using Confirm the water faucet 1. Insert a new flat washer into the end of the inlet hoses. Firmly put the washers in the coupling. Note: You may have to use pliers. to tighte.n the coupling. Do not over tighten because you may cause damage to the valve. 2. Connect the water inlet hose to the water taps. 3. Connect the other ends to their respective washer inlets located at the rear of the washer. Nut of the water inlet hose Water absorption cushion Jointer of the water inlet valve 4. Check connection between the adapter of water inlet pipe and water faucet. 1)Slightly move water pipe to check whether is secured. 2)Except for the device,open water faucet to check water leakage. 3)Test and ensure that the connecting matter is indeed normal,then can use normally. 4)Don't fold water pipe improperly. 5)Check connection between adapter of water inlet pipe and water faucet before using to avoid water drip due to improper usage of the device. 5