Haier L1911W-A User Manual - Page 14

Haier L1911W-A Manual

Page 14 highlights

Menu Operations Parental Menu Options Continued This function enables you to block certain TV channels in accordance to the requirements established by the FCC. 2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to go into PG RATING and MPAA Press VOL+/VOL- button to set the CHILD LOCK ON and PARENTAL LOCK OFF. 4. Repeat step 2 and step 3 until desired quality has been achieved . CHILD LOCK:Child Lock off means the lock function is turned off . If the Child Lock is in "off" mode then function will not be active to accept the broadcast signal.Child Lock on means the lock function is turned on. If the lock is in the "on" mode then function is activated to accept the broadcast signal. MPAA: When MPAA rating is selected, you could select OFF/G/PG/PG-13 R/NC17/X . PG RATING:Select the TV Rating option. You could select from OFF/TV-Y/TV-Y7/ TV-G/TV-PG/TV-14/TV-MA. PG CONTENTS: Press to set the grade of the program . When there is this grade of program , this program will not be display . CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/ 14+/18+ . CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/ 18+ . CHANGE PASSWORD: The "Default Password" preset by the manufacturer is "0000" . If you want to change the preset password to your own password, just choose any four digits that can be easily remembered and set. Once you set password for a particular channel, that channel will be blocked.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

Connection Instructions
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
PC Setup
Connection and use steps:
1.Read the user guide supplied with
your computer and ensure that it has
a VGA connector;
2.Make sure that the power of the LCD
-TV and the PC are off;
3.Connect a D type 15-pin VGA interface
cable ( not supplied ) to the VGA video
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screws on the VGA
connectors once they are firmly
connected;
4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;
5.Press the TV/AV button to set the video
input mode of the LCD-TV to PC-RGB;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.