Haier PDVD770 User Manual - Page 5
Install the battery into the remote control as illustrated below, Attach the rechargeable battery - not working
View all Haier PDVD770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Install the battery into the remote control as illustrated below: + Lithium Cell Cr2025 3V sc2 Attach the rechargeable battery pack onto the player's bottom as illustrated below: BATTERY PACK BOTTOM VIEW NOTE: This unit works either with the battery pack supplied or on AC power. Unplug the AC Power adapter from the DC input jack to use the battery pack (after it is fully charged). Plugging in the AC Power adapter while the battery pack is attached initiates battery charging. The charge LED indicator flashes red during charging, When the battery is fully charged the indicator steadies on. Fully charging a run-out battery pack may take 4 hours or longer. A fully charged battery pack can endure approximately 2.5 hours of continuous DVD playback. This playing time may vary with the surrounding environment, the volume level of the speaker and the battery condition. It is advised that you wait 10-20 minutes before recharging the battery pack if it has gone flat during operation. 4