Haier RRTG18PABW Product Manual - Page 12

English Reinstallation: (see fig. # 5 and # 6) 1. As shown in fig. 5, dismantle the lower hinge and plastic pad from right side and then install them on the left side. Bottom hinge axle Plastic pad Bottom hinge pad Bottom hinge fig. # 5 2. Install refrigerator door: make the left bottom hole of the refrigerator compartment door fall over the lower hinge axle, move back and forward the door to make it straight and in alignment with central hinge. Install the central hinge again, turn the hinge axle until it completely enters the door body, then fix it with screws. Central hinge pad Central hinge axle Central hinge fig. # 6 3. As shown in fig. 6, install the central hinge and pad to the left side. 4. Install freezer door: make the left bottom hole of freezer door fall over the central axle; raise upper hinge, so that hinge axle can be installed in the upper hole of the upper part of the freezer door; adjust door to make it straight and level. Tighten the screws of upper hinge. 5. As shown in Fig. 3, install the upper freezer hinge to the left corresponding position. 6. Replace the hinge cover as shown in Fig. 3. 10