Haier RRTG18PABW Product Manual - Page 15
Utility Drawer and Cover
UPC - 688057305486
View all Haier RRTG18PABW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English To replace a full width or half-width cantilevered shelf: (see fig. # 9) 1. Guide the rear shelf hooks into the desired slots in the metal shelf supports located on the back refrigerator wall. 2. Tilt up front of the shelf to set the shelf hooks in place. 3. Lower the front of the shelf into position until the rear hooks lock into the slots of the metal shelf supports. fig. # 9 Utility Drawer and Cover To remove the utility drawer: (see fig. # 10) 1. Slide utility drawer out until it reaches the stop. 2. Grasp front of drawer with one hand while supporting the bottom of the drawer with the other hand. Slide drawer out gently the rest of the way. fig. # 10 To remove utility drawer cover shelf: (see fig. # 11) 1. Remove utility drawer first following the above instructions. 2. Tilt up front of the shelf until the rear shelf hooks are no longer locked in place in the rear metal shelf supports. 3. Pull the shelf gently until it is removed. 13