Haier XPB55-13S User Manual - Page 10

Usage of the detergent Using process How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. How to use the washing powder Direct dissolved in the machine: 1.Fill small quantity of water. 2.Add the powder . Run for 30 seconds to dissolve it completely. 3.Put it in the laundries. Select suitable water level. The instant dissolving of the washing powder: 1.Prepare warm water of 30 C and a container. 2.Add the powder while stirring to fully dissolve it. The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity. It is suggested not to use high sudsing detergent. Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. Selection of the quantity of the washing powder list 1 Laundries quantity Water level Water quantity Standard dosage Concentrated washing powder Common washing powder 3.6kg~5.5kg 2.0kg~3.6kg Below2.0kg MAX (about43L) MED (about36L) MIN (about30L) About 36g About 30g About 25g About 43g About 36g About 30g Selection of the current , water level and washing time list 2 Laundries quantity Current Water level Water quantity Laundries Washing time (minutes) 2.4kg~5.5kg Strong MED (about36L) ~ MAX (about43L) MIN (about30L) Below2.4kg Standard ~ MED (about36L) Knitwear Cotton,blending,linen Very dirty and thick Bed sheet Silk(thin laundries) Chemical fiber Cotton,blending,linen About3~6 About8~10 About10~13 About7~13 About2~4 About3~6 About8~10 Washing sequence Using process Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer). Wash selector (soft current, strong current) Water-filling entrance Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF SILK WOOL STRONG STANDARD WASH TIMER DRAIN COTTON LINEN WASH SELECTOR OFF MAX BUZZER OFF SILK WOOL SPIN TIMER Wash 1.Water inlet selector (1) Set the water inlet selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. WASH SPIN Figure 1 Figure 2 3.Put in the laundries. If the water quantity is insufficient, please add water. STRONG STANDARD DRAIN 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) WASH SELECTOR Figure 3 OFF SILK WOOL 5.Select the washing time Select the washing time according to the laundries. (Figure 4) Figure 4 WASH TIMER COTTON LINEN STRONG 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR DRAIN Figure 5