Haier XPB55-13S User Manual - Page 9
Using process
View all Haier XPB55-13S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Using process Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries are slanting Proper No gland (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes. Outer cover of The spin tub Inner cover of The spin tub 3.Run the foam-removing spinning. (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes. WASH SPIN The musts in washing Using process Reference weight of the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest capacity of this machine is 5.5 kg. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing. Do not select " High " water level for laundries less than 2.4kg, so as to avoid splashing of water. Working suit up,down cotton,about 1120g Blanket cotton,about 900g Jeans about 800g Pajamas Blending coat about 800g Shirt cotton,about 300g Jacket cotton,about 800g Undershirt cotton,about 180g Single bed sheet cotton,about 600g Underpants cotton,about 70g Socking blending,about 50g