Haier XQB50-18 User Manual - Page 13

Using process Reserve/remain time digitron During sensing, it displays -During reserve process, it displays the remained reserve time (in hours). During runtime of program, it displays the remained time (minutes). If the remained time exceeds 99 minutes, it adopts A at tens place to represent 100 minutes, b to represent 110 minutes, C to represent 120 minutes. For instance, A8 represents108 minutes, b8represents118 minutes, C8 represents128 minutes. In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16) Page16 Start/Pause button After the power is switched on, push it to start the machine During working, push it to pause working. During pause, push it to resume working. Power On/Off button Push the On/Off button to switch on the power. When the power is on, push it again to switch off the power. Push the On/Off button to switch on the power. If the start/pause button is not pushed, the washing machine will automatically switch off the power after 5 minutes. RESERVE TIME 9 7 5 3 REMAINED TIME 1 10 FIBRE 8 COTTON 6 WOOL 4 SILK 2 NORMAL Fuzzy NIGHTTIME QUICK JEANS RESERVATION WATER LEVEL SELECTION PROGRAM SELECTION START PAUSE POWER ON / OFF Reserve button In normal operation mode, the reserve indicator light is off. The time remain indicator light is on. The digitron displays the time remained (in minute) before the washing is finished. Push down the reserve button, the reserve indicator light is on. The digitron displays the reserve time of finishing washing (in hour). When the machine is started, the reserve indicator light is on, indicating that the reserve function is running. Water level selection button The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value among 4, 6, 8,and 10 automatically. You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting. If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 . If quick program is selected, it will display water level 2. When water level 2 is reached in water filling, it will perform washing while filling water. When water level 4 is reached, it will change to normal washing. During wash and rinse process, you can push and hold the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries. Program selection button Following automatic programs are available for selection Program Applicable situation Standard Common washing Nighttime Suitable for low noise wash during the night Quick Quick wash of the laundry under 1 kg with light soil Jeans Washing the biger and thicker laundries Fiber Washing the iber laundries Cotton Wool Silk Washing the cotton textiles Washing the woolen textiles Washing the silk textile