Haier XQB50-18 User Manual - Page 16

Using process * Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: From the moment the intermittent spinning starts to the moment it stops running ( the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning) * In soaking, after water inlet it will perform soaking for about 10-40 minutes, then perform washing, rinsing and spinning. * In selecting QUICK program, the washing machine will set the complete process of wash, rinse and spin automatically. 5. Push the RESERVATION button to select suitable RESER- reservation wash program VATION After switching on the power, the reserve program is set to off mode automatically. If you need the washing process to be finished at reserved time, please push the RESERVATION button to set the reservation wash program. Refer to RESERVATION BUTTON in Page 11 for selection. Page11 Confirm the operation of reservation program When the reservation function is activated, the indicator light of the program you have set will be off. The RESERVATION TIME will be on and the digitron displays the remained time. During reservation process, push the RESERVATION button to display the reserve mode. RESERVE REMAINED To change the running program or cancel the reserve setting, TIME TIME you need to switch off the power and make new selection. the washing will be finished after 18 hours. 6. Push the START/PAUSE button 5 Close the lid START PAUSE 6 Washing finished As the top lid opened, the Washer will automatically give an alarm and stop running exclusively during supplying water and drain. After Finishing wash alarm automatically After finishing wash, it will switch off power automatically