Hamilton Beach 40729 Use And Care - Page 9

840112600 Ev00.qxd 7/16/03 1:55 PM Page 9 Troubleshooting PROBLEM Espresso will not flow out Machine is very noisy when operating Espresso flavor is too weak Espresso flavor is too strong or bitter Difficult to froth milk Things TO CHECK • Is the water reservoir empty? • Is the water reservoir properly fitted into position? • Make sure that the coffee grounds are not overpacked in the filter • Is filter holder properly fitted into the espresso maker? • Clean the filter, filter holder, and brew head • Is the water reservoir empty? • Is the water reservoir properly fitted into position? • Is the filter holder properly fitted into position? • Always use fresh espresso ground coffee • Tamp the ground coffee down firmly • The longer the brew time, the weaker the espresso (1 serving = 1 to 11⁄2 ounces) • Be sure there is sufficient ground coffee in the filter • Coffee grounds are too coarse • Try a different brand or roast of coffee • Ensure steam button is OFF. If the steam button was left on, the water may have been too hot. Rotate steam control dial counterclockwise to release steam into a frothing cup or pitcher and allow appliance to cool. Then repeat steps in the section "To make espresso" • Too much espresso ground was used • Grounds were too fine • Brew longer before pressing espresso button to OFF • Try different a different brand or roast of coffee • Use the Hamilton Beach Custom Grind™ coffee grinder • Always use fresh, cold milk (skim milk is recommended) • Use a cold, stainless steel cup • Clean the frothing nozzle • Move the cup slightly up and down while frothing • Make sure that the Steam button is depressed and that the Temperature/Ready light is off 9