Hamilton Beach 68050C Use & Care - Page 4
How to Operate
View all Hamilton Beach 68050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
840154600 ENv06.qxd 10/26/06 11:37 AM Page 4 How to Operate 1. Make sure the unit is unplugged. Place base on clean, dry surface. 2. Hook front housing onto base. 3. Place ice shaving chamber in front housing and ensure it is seated on the shaft. 4. Twist shaft in direction of arrow to lock into position. 7. Slide bowl into place on base and turn clockwise until it stops at post. This will allow the mixing paddle to mix ice and ingredients once operation begins. NOTE: The cup guide on base may be used to shave ice into bowl or cup other than bowl supplied. 8. Turn selector knob to desired setting. Slushie setting produces finer ice. Snow Cone setting produces coarser ice. 9. Place ice in ice shaving chamber. Do not fill above top rim of ice shaving chamber. 10. Plug cord into outlet. 11. Place lid on front housing and turn clockwise to lock interlock switch (Power Start/ Stop). The unit will start and begin to shave ice. 5. Place mixing paddle in bowl. 6. If mixing shaved ice with other ingredients, place ingredients in bowl. NOTE: Use serving size markings on bowl as a guide for appropriate ice and liquid levels. NOTE: It may be necessary to open lid occasionally to redistribute ice. WARNING Cut Hazard • Avoid contact with shaving blade. • Do not use if shaving blade is loose, cracked, bent or damaged. 12. Turn lid counterclockwise to stop. DO NOT shave ice above top ICE line. 13. To remove bowl, turn counterclockwise, slide out and serve Icy Treat. 4