Hamilton Beach 68050C Use & Care - Page 5

840154600 ENv06.qxd 10/26/06 11:37 AM Page 5 How to Clean 1. Unplug unit from electrical outlet. 2. Wash lid, ice shaving chamber, front housing with shaving blade, mixing paddle, and bowl in hot, soapy water. Rinse and dry. All removable parts may be washed on the top rack of a dishwasher, or if an energy saver mode is used, top or bottom rack. 3. Wipe the base with a damp cloth. Dry with a soft, dry cloth. Do not use abrasives. wWARNING Electrical Shock Hazard • Disconnect power before cleaning. • Do not immerse cord, plug or base in any liquid. Failure to follow these instructions can result in death or electrical shock. WARNING Cut Hazard • Avoid contact with shaving blade. • Do not use if shaving blade is loose, cracked, bent or damaged. Troubleshooting PROBLEM Ice not shaving. Mixing paddle not turning. Unit is leaking. PROBABLE CAUSE/SOLUTION • Turn off. Redistribute ice in chamber. • Is lid completely locked into interlock (power Start/Stop) switch? • Is unit plugged in? • Is front housing locked into base? • Is the shaft locked into position? • Ensure ice shaving chamber is placed in front housing AFTER the front housing has been locked onto the base. • Make sure bowl has been turned clockwise to stop at post on base • Unshaven ice may melt and drip onto base, giving the appearance of leakage. Wipe base dry with a soft cloth. See "How to Clean." 5