Hamilton Beach 70300 Use & Care - Page 5
Normal, Processing
View all Hamilton Beach 70300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
(f) 840066200 Ev03.qxd 1/T /00 4:52 PM Page - Normal Processing 1. Make sure the Control Switch is turned to OFF (O) and the unit is unplugged. 2. Lock the bowl onto base. (See "How to Lock the Bowl" on page 4.) 3. Choose the blade or disc to be used: S-Blade or Slicer/Shredder Disc. Handle carefully; the blades and disc are sharp. (See the "Processing Chart" on page 7 for more information about which attachment to use for your specific application.) S-Blade The S-Blade should be used to mince or chop foods, mix ingredients, or to puree a mixture. 4. Place the S-Blade onto center column of food processor in center of bowl. Turn slowly until blade drops into place. Slicer/Shredder Disc • To slice or shred cheese, select firm cheese like cheddar, monterey jack, or swiss. Place cheese in freezer for 1 hour before processing. • The Reversible Slicer/Shredder Disc has a slicing blade on one side and shredding teeth on the other. Place on shaft with desired cutting edge facing up. • To julienne vegetables, slice then remove from bowl and restack the vegetables. Pack into food chute with slices vertical. Slice again to make match-stick cut vegetables. 4. Put disc shaft on center column and put Slicer/Shredder Disc in place with the desired side facing up for either slicing or shredding. Lock cover onto bowl. (See "How to Lock the Cover" on page 4.) ...MM. Ones 5. Lock cover onto bowl. (See "How to Lock the Cover" on page 4.) Insert food pusher into food chute. 6. Plug in unit and process food to desired texture. The processing speed and time will determine the finished consistency of the food. The PULSE/MOMENTARY 0 position can help you avoid over-processing. C rA 5. Cut food to fit food chute. Pack food chute tightly with food. Insert food pusher in chute. Always use the food pusher to feed food into the chute. NEVER PUSH FOOD THROUGH CHUTE WITH HANDS. 6. Plug in unit and process food. 7. Select speed. While pressing on food pusher, move switch to ON ( I ) or PULSE/MOMENTARY@ to process food. 8. When food chute is empty, move switch to OFF (O) or release from PULSE/MOMENTARY 0 position. Wait until blade has stopped rotating before removing cover. 5