Hamilton Beach 70820 Use and Care Manual - Page 8

How to Use Reversible Shredding Disc w WARNING Laceration Hazard. • Handle disc carefully; it is very sharp. Make sure unit is switched to OFF ( ) and is unplugged. • Always use food pusher to feed food into the chute. Never push food through chute with hands or other objects. 1. Place bowl on base with handle facing to the right. Disc is labeled FINE SHRED on one side and COARSE SHRED on the other side. Carefully place shredding disc straight down onto motor shaft with desired side facing UP. 2. Place lid on bowl. Raise locking arm up and over bowl and snap into place. Plug into outlet. 3. Place food into food chute and use food pusher. Do not fill bowl above MAX FILL line. 4. Select Low (LO) speed by moving left switch down. NOTE: This food processor will start in the speed it was last used. 5. Move ON ( ) switch up to turn on food processor or press switch down to PULSE for instant on and off control. 6. When finished, switch to OFF ( ) and unplug. Push locking arm back to unlock lid and lower arm onto counter. 7. Always remove lid before removing bowl to avoid possible damage to the appliance. NOTES: • Check to make sure no other blades are in the bottom of the work bowl. • Bowl scraper cannot be used with the reversible shredding disc. • LO speed is recommended for slicing and shredding. 8