Harbor Freight Tools 63314 User Manual - Page 2

Before start-up, note the following, CAUTION, Fluid Type

Page 2 highlights

Before start-up, note the following: The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz. CAUTION This pump has been evaluated for use with water only. WARNING IMPORTANT! For your own safety - before starting to run the pump, please have the following items checked by an expert: Pump 1. Risk of electric shock - This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle. 2. Risk of electric shock - This pump has not been investigated for use in swimming pool areas. 3. The electrical connections must be protected from moisture. 4. If there is danger of flooding, the electrical connections must be taken to higher ground. 5. Circulation of caustic fluids, as well as the circulation of abrasive materials, must be avoided at all costs. 6. The pump must be protected from frost. 7. The pump must be protected from running dry. 8. Access by children should also be prevented with appropriate measures. 9. To reduce the risk of electric shock, use only on portable self-contained fountains. 10. POSITION OF PUMP: To avoid the possibility of the pump plug or receptacle getting wet, position pump to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. The user should arrange a "drip loop" in the cord connecting the pump to a receptacle. The "drip loop" is that part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water traveling along the cord and coming in contact with the receptacle. 11. To prevent death from electric shock, pump must be connected only to a GFCI protected outlet. 12. Do not use an extension cord with this item. 13. WARNING: The cord of this product contains lead and/or di (2-ethylhexyl) phthalate (DEHP), chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) 14. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. 15. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Fluid Type The Pump is designed for use with water with a maximum temperature of 77° F (25°C). Do not use the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products. Page 2 For technical questions, please call 1-888-866-5797. Item 63314

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Page 2
For technical questions, please call 1-888-866-5797.
Item 63314
Before start-up, note the following:
The pump must be connected to a GFCI protected plug which has been installed according
to regulations.
The plug must have a supply voltage of 120 VAC at 60 Hz.
CAUTION
This pump has been evaluated for use with water only.
WARNING
IMPORTANT!
For your own safety –
before starting to run the pump, please have
the following items checked by an expert:
1.
Risk of electric shock – This pump is supplied
with a grounding conductor and grounding-type
attachment plug.
To reduce the risk of electric shock,
be certain that it is connected only to a properly
grounded, grounding-type receptacle.
2.
Risk of electric shock – This pump has not been
investigated for use in swimming pool areas.
3.
The electrical connections must be
protected from moisture.
4.
If there is danger of flooding, the electrical
connections must be taken to higher ground.
5.
Circulation of caustic fluids, as well as the circulation
of abrasive materials, must be avoided at all costs.
6.
The pump must be protected from frost.
7.
The pump must be protected from running dry.
8.
Access by children should also be
prevented with appropriate measures.
9.
To reduce the risk of electric shock, use only
on portable self-contained fountains.
10.
POSITION OF PUMP:
To avoid the possibility of the pump plug or
receptacle getting wet, position pump to one
side of a wall mounted receptacle to prevent
water from dripping onto the receptacle or plug.
The user should arrange a “drip loop” in the
cord connecting the pump to a receptacle.
Pump
The “drip loop” is that part of the cord below the level
of the receptacle, or the connector if an extension
cord is used, to prevent water traveling along the
cord and coming in contact with the receptacle.
11.
To prevent death from electric shock,
pump must be connected only to a GFCI
protected outlet.
12. Do not use an extension cord with this item.
13. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5,
et seq.
)
14. People with pacemakers should consult their
physician(s) before use.
Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
15. The warnings, precautions, and instructions
discussed in this instruction manual cannot cover all
possible conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product, but
must be supplied by the operator.
Fluid Type
The Pump is designed for use with water with a maximum temperature of 77° F (25°C).
Do not use the pump
for other fluids, especially not fuels, cleaning fluids, or other chemical products.