Harbor Freight Tools 63314 User Manual - Page 3

Specifications Electrical Rating Power Cord Length Maximum Flow @ 0' Maximum Head lift @ 0 Flow Discharge Port 120VAC / 60Hz / 0.6A 12' 620 GPH 11′ 1/2″ Installation The submersible motor pump must be installed in a stationary position with either: a. A fixed pipeline or b. A flexible hose pipe. Please note! 1. Do not install the pump by suspending it unsupported from its delivery pipe or power cord. The pump must be suspended from the handle or be placed on the bottom of the basin. To ensure that the pump works properly, keep the bottom of the fountain/water feature free from sludge and dirt of all kinds. Power Supply 2. If the water level sinks too low, any sludge in the basin will dry out and stop the pump from starting. Pump will not function unless fully submerged. 1. The pump is equipped with a shock-proof plug 3. according to regulations. The pump is designed to be connected to 120 VAC, 60 Hz GFCI protected socket. WARNING: To prevent death from electric shock, pump must be connected only to a GFCI protected outlet. 2. Make sure that the socket is sufficiently secured and is in excellent condition. WARNING! If the power cord or plug is damaged, do not use the pump. The power cord or plug may only be repaired by a certified electrician. Areas of use 1. This pump is designed to pump water only. 2. This pump is designed to be used for: Fresh-water aquariums and water features Installation Instructions 3. This pump should NOT be used for: Salt-water or brackish water aquariums or water features. 1. Place the pump on the bottom of the aquarium/ water feature. Suction cups must be in contact with the aquarium/fountain floor or a smooth platform. 2. Shift regulator to adjust flow rate. Item 63314 For technical questions, please call 1-888-866-5797. Page 3