Harbor Freight Tools 63314 User Manual - Page 4
Operation
 |
View all Harbor Freight Tools 63314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operation After reading these instructions, consider the following points before starting the pump: 1. Verify that the pump rests on the floor of the basin, if it is not suspended by the handle. 2. Verify that the discharge pipe is properly connected. 3. Verify that the electrical connection is 120 VAC, 60 Hz. 4. Verify that the electrical socket is GFCI protected and in good condition. Test GFCI protected outlet before use. 5. Verify that water and moisture cannot get near the power supply socket. 6. Verify that the pump is installed so as to prevent running dry. Page 4 For technical questions, please call 1-888-866-5797. Item 63314
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Page 4
For technical questions, please call 1-888-866-5797.
Item 63314
Operation
After reading these instructions, consider the following points before starting the pump:
1.
Verify that the pump rests on the floor of the basin,
if it is not suspended by the handle.
2.
Verify that the discharge pipe is properly connected.
3.
Verify that the electrical connection
is 120 VAC, 60 Hz.
4.
Verify that the electrical socket is GFCI
protected and in good condition. Test
GFCI protected outlet before use.
5.
Verify that water and moisture cannot
get near the power supply socket.
6.
Verify that the pump is installed so
as to prevent running dry.