Harbor Freight Tools 66615 User Manual - Page 11

SAFETY Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM AccIDENTAL OPERATION: Turn the Power Switch off and unplug the Polisher from its electrical outlet before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly AUXILIARY HANDLE (36) GEAR BOX (32) SPINDLE LOcK (34) 1. To attach the Mounting Disc (51) to the Polisher, press and hold the Spindle Lock (34). Screw the Mounting Disc onto the Spindle (50) of the tool. Then release pressure on the Spindle Lock. 2. To attach the Auxiliary Handle (36), screw the Handle firmly into the threaded mounting hole located on either side of the Gear Box (32). MOUNTING DISc (51) Figure A SETUP OPERATION MAINTENANcE Item 66615 For technical questions, please call 1-888-866-5797. Page 11