Harbor Freight Tools 66615 User Manual - Page 16
Cleaning, Maintenance, and Lubrication
View all Harbor Freight Tools 66615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SAFETY Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM AccIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, Maintenance, and Lubrication 1. BEFORE EAcH USE, inspect the general condition of the tool. Check for: • loose hardware, • misalignment or binding of moving parts, • damaged cord/electrical wiring, • cracked or broken parts, and • any other condition that may affect its safe operation. 2. AFTER USE, wipe external surfaces of the tool with clean cloth. 3. Remove the Bonnet from the tool when not in use. This will allow the Bonnet to dry and retain its original shape. The Bonnets may be machine-washed in cold water with detergent. Then machine-dry the Bonnets at medium heat. 4. Periodically, wear ANSI-approved safety goggles and NIOSH-approved breathing protection and blow dust and grit out of the motor vents using dry compressed air. 5. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. SETUP OPERATION MAINTENANcE Page 16 For technical questions, please call 1-888-866-5797. Item 66615