Harbor Freight Tools 66615 User Manual - Page 14
Sanding Instructions
View all Harbor Freight Tools 66615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
SAFETY Sanding Instructions TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands. 1. Wipe the work surface clean of all dirt and debris, especially that of previous coarser sanding sessions, which will scratch the surface of a finer grit sanding session. 2. Attach the desired grit Sanding Disk (sold separately) onto the Backing Pad. 3. Make sure that the Switch is in the offposition, then plug in the tool. 4. Turn the Power Switch to its "ON" position to start the tool. 5. Wait until the tool has reached full speed, then gently contact the surface. 6. Keep heavy pressure off of the tool when operating. Allow the tool to do the work. 7. Move the tool in a uniform pattern up and down or side to side while sanding to ensure even sanding. 8. Periodically, stop the tool and check for disc wear. Replace worn sanding discs as needed. 9. TO PREVENT AccIDENTS, AFTER USE: Turn off the tool. WARNING! Allow the tool to come to a complete stop before setting it down. Unplug the tool. Clean, then store the tool indoors out of children's reach. SETUP OPERATION MAINTENANcE Page 14 For technical questions, please call 1-888-866-5797. Item 66615