Harbor Freight Tools 68829 User Manual - Page 6

Safety Setup Handle Notch • Must be far enough down the stick to allow a comfortable and firm grip. • Must be deep enough to prevent hand from slipping down the stick. • Do not cut more than halfway into the stick to prevent weakening. • Corners may be rounded to increase comfort. Essential Straight Push-stick Features and Functions Note: Straight style (traditional) stick shown. A different stick design may be used if it properly protects against all hazards. Diagram not to scale. • Push sticks must be made from sturdy, defect-free, plywood or normal wood to prevent unexpected breakage. Material must be at least 1/4″ thick, but no thicker than the finished wood. • Inspect push stick before use and do not use a damaged or deteriorated push stick. • Push stick dimensions will vary depending on the application and user. NOT TO Stick Length • Must be long enough to keep hand clear of blade. • At least 6″ from end of handle to closest part of notch. SCALE. At Least 6″ Operation Maintenance Notch • Must be right (90°) angle, cut at 30°-40° from the angle of the stick to keep hands out of the line of the blade. • The lower lip of the notch must be no longer than the workpiece is thick. thiwcoLrkeknspesisteshcaen 90° 30°-40° Page 6 For technical questions, please call 1-800-444-3353. Item 68829