Harman Kardon AVI200MKII Owners Manual - Page 10

15. REMOTE IN JACK Connect a Harman Kardon HE 1000 remote I.R. sensor to this jack. You can operate the unit by remote commander through the adaptor. It is convenient when the unit is located in a separate room. (See page 10) 16. FRONT, CENTER, REAR PRE OUT AND MAIN IN JACKS FRONT PRE OUT When a separate power amplifier is used to drive the front speakers, connect the power amplifier input to these jacks. FRONT MAIN IN When a separate pre-amplifier is connected and this unit is used as a power amplifier, connect the pre-amplifier output to these jacks. NOTE: When you do not use the PRE OUT and MAIN IN separately, always connect the PRE OUT and MAIN IN jacks with a jumper plug. CENTER PRE OUT When a separate power amplifier is used to drive the center speaker, connect the power amplifier input to these jacks. REAR PRE OUT When a separate power amplifier is used to drive the rear speaker, connect the power amplifier input to these jacks. 17. SPEAKER TERMINALS (1, 2 and CENTER) Connect the main left (L) and right (R) speakers to the corresponding 1 and 2 speaker terminals. Connect the center speaker to the center (+), (-) terminals. Make sure that the positive (+) and negative (-) terminals on the speaker are connected to the corresponding terminals on the amplifier. 18. REAR SPEAKER TERMINALS Connect rear speakers to the corresponding terminals. 19. AC INPUT CORD Plug this cord in AC outlet on a wall. 20. AC SWITCHED OUTLET These outlets provides AC power. The AC power is switched by the power button. Use these outlets for a CD player and a cassette deck. 21. AC UNSWITCHED OUTLET This outlet provides AC power. The AC power is not switched by the power button. Use this outlet for a turntable. NOTE: Do not plug irons or toasters or other products with high power consumption into these outlets. 22.. SUBWOOFER OUT When a separate power amplifier is used to power a subwoofer connect these jacks to the input of the amplifier (For Subwoofer). 9