Harman Kardon AVI200MKII Owners Manual - Page 9
Video, Input/output, Jacks
View all Harman Kardon AVI200MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Rear Panel Connections 1. SYSTEM GROUND TERMINAL To reduce hum to a minimum, connect the ground lead from your turntable to this terminal. 2. PHONO INPUT JACKS Input for TURNTABLE with an MM cartridge requiring a 47K ohm load impedance. Connect shielded cables from your phono to the LEFT and RIGHT input jacks. NOTE: Do not place your TURNTABLE on a speaker enclosure. This will avoid howling caused by transmission of the speaker vibration to the TURNTABLE. 3. TUNER INPUT JACKS Connect the line output of your tuner to these jacks 4. TV/AUX INPUT JACKS This extra stereo input is provided for any source you want to hear. An additional compact disc player, a tape recorder, a video cassette recorder (VCR) etc. can be plugged into these jacks. 5. CD INPUT JACKS Connect the output cables of a compact disc player to these jacks. 6. TAPE 1 PLAY JACKS Connect the line output of your CASSETTE DECK to these jacks. 7. TAPE 1 REC JACKS Connect the line input of your CASSETTE DECK to these jacks. 8. TAPE 2 MONITOR PLAY JACKS Connect the line output of your cassette deck to these jacks. This input may be connected to the line output of the audio processor like an optional graphic equalizer or a Digital Signal Processor. 9. TAPE 2 MONITOR REC JACKS Connect the line input of your cassette deck to these jacks. EQ controls, loudness and volume settings have no effect on the signal from this output for recording. To monitor this input source while recording, press the TAPE 2 MONITOR button (MONITOR ON position). These REC jacks may be used for the line input of the audio processor like an optional graphic equalizer or a Digital Signal Processor. 10. AUDIO INPUT (PLAY) JACKS OF VCR 1 Connect these jacks to the corresponding OUTPUT jacks of your TV (if available) or VCR. 11. AUDIO OUTPUT (REC) JACKS OF VCR1 Connect these jacks to the corresponding INPUT jacks of a VCR. VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO INPUT jacks of the VCR. 12. VIDEO INPUT/OUTPUT (PLAY) JACKS OF VCR1 Connect these jacks to the corresponding OUTPUT jacks of your VCR or VDP. 13. VIDEO MONITOR JACK Connect this jack to the VIDEO INPUT jack of a TV/MONITOR. 14. REMOTE OUT JACK Connect this jack to the "REMOTE IN" jack on a Harman Kardon component. Use one of the accessory mini-plug cables. You can control many other Harman Kardon components in your system using the AVI200 II remote commander. 8