Harman Kardon AVR25MKII Owners Manual - Page 6
II II
View all Harman Kardon AVR25MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
MI • II II • • II II IN • II 13. TEST TONE BUTTON This button operates only in DOLBY PRO-LOGIC and DOLBY 3 STEREO mode. When the button is pressed, 2 seconds of test tone is generated in all channels (Left, Center, Right, and Rear) in succession. The display window shows TEST Left, Center, Right, and Rear in succession (in DOLBY PROLOGIC mode) or Left Center or Right (in DOLBY 3 STEREO mode) in succession. Use this button to test speaker connections. 14. SOURCE/DIRECT BUTTON This feature bypasses the tone control circuitry, resulting in flatter frequency response and wider bandwidth. When it is activated, "DIRECT" illuminates in the display. 15. PRESET SCAN BUTTON Press this button to scan the preset station frequencies. The receiver stops at each preset location that contains a frequency for about 4 seconds, so you can hear a station. The preset location indicator blinks 4 times. Press this button again to stop scanning. 16. SEARCH SELECTOR Press this button to select AUTO or MANUAL tuning. ■ In AUTO mode, scanning is automatically continued up or down until the next station is picked up by pressing the UP/DOWN tuning buttons. The display window shows `AUTO'. Use this mode to quickly find strong AM or FM stations. ■ In MANUAL mode, the frequency is changed by a step with the UP/DOWN button. If you keep pressing the UP/DOWN tuning buttons, scanning is continued until the button is released. NOTE: Tuning Intervals: BAND USA/CANADA FM 50 KHz AM 10 KHz 17. FM MODE BUTTON Press this button to select stereo or mono mode. ■ STEREO: Provides stereophonic reception of an FM stereo broadcast. The display window shows `FMST'. ■ MONO: The left and right channel signals detected from an FM stereo broadcast are mixed and reproduced through both channels. If you want to find a weak FM station, select this mode. 18. STATION MEMORY BUTTON Use this button to store an AM or FM frequency. Press this button and select one of 30 preset locations to store the frequency with the STATION PRESET buttons while the memory indicator, 'MEMORY' blinks. NOTE: When you store a frequency in a memory location that already contains a frequency, you replace the previous frequency. If your receiver is disconnected from AC power for more than about 10 days, it loses all stored frequencies. 19. UP/DOWN TUNING BUTTONS Press the DOWN button ( v ) to tune in lower frequency stations, the UP button ( A ) to tune in higher frequency stations. If you press the DOWN button when the display is at the bottom of the frequency range, the display returns to the top of the range. If you press the UP button when the display is at the top of the frequency range, the display returns to the bottom of the range. When the receiver finds a strong frequency, the display window shows `TUNED'. 5