Harman Kardon DP 2US Owners Manual - Page 12

Configuring Audio Playback Wireless FM Transmitter or Wired FM Antenna Adapter If you use the built-in wireless FM transmitter, no additional wired audio connection is necessary. To use the wired FM Antenna Adapter, you will need to wire it into your vehicle's FM Antenna connection first, then complete these steps. Either way, you must enable and select the FM transmitter frequency to hear audio through your vehicle's FM radio. Remember, you may try several frequencies for the best result. 1 Enable the FM Transmitter and Select FM Frequency Preset Settings System Settings FM Transmitter Enable Yes Once you have selected an FM preset, tune your FM radio to that same station. you should hear audio playback clearly. If that frequency is not playing music clearly, select another preset by locating a frequency on your radio that is only static and save that as a preset. This will offer the clearest path for the Drive + Play 2 system's audio playback. Preset 1 : 88.1 Preset 2 : 88.7 Preset 3 : 107.9 Add Preset Line-Output Audio Connections To use the Line-Out audio connection, the FM Transmitter must first be disabled using the steps shown. Following that, you will need to connect into your head unit's AUX input. Many vehicles may require a thirdparty adapter (not included) to provide this type of connection. 1 Disable the FM Transmitter Settings System Settings FM Transmitter Enable No Quick-Start Guide 12